MicroNet Fibre to SAS/SATA II RAID Subsystem Uživatelský manuál Strana 45
- Strana / 160
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
45
2. Place one inner bracket to the side of the chassis. Align the holes on the front
side of the inner rail to the holes on the RAID system ear. Tighten the screw
that was removed in Step1.
3. Use four M4 flat head screws to attach the inner bracket to one of the side.
Make sure the holes of the inner bracket are aligned to the holes on the side of
the RAID system.
4. Repeat Steps 1 to 3 for the other inner bracket on the left side.
5. Loosen eight M4 screws on each of the rack rails. Make the necessary
adjustment on the length of the rack rails to conform to the depth of the rack.
Then screw the M4 screws back to the rack rails.
- User Manual 1
- Table of Contents 2
- Preface 6
- Before You Begin 7
- Chapter 1 Introduction 9
- 1.2 Enclosure Chassis 11
- 2.1 Controller Module 13
- For PRO-90-5601 SES board: 26
- 2.4 Drive Carrier Module 32
- 2.5 LCD Display Panel 36
- Environmental Status 37
- 2.7 Backup Battery Unit 49
- Chapter 4 RAID Levels 54
- RAID 1 – Mirroring 55
- Chapter 5 proRAID Manager 57
- Miscellaneous 62
- Expanders 63
- Logical Volumes 64
- 5.4 Screen Template 66
- Chapter 6 RAID Management 67
- 6.1.2.1 Read Cache Data 69
- 6.1.2.3 Write Cache Data 69
- 6.1.2.4 Disk Caching 70
- 6.1.3 RAID Profile Usage 71
- 6.1.4.1 Disabled 73
- 6.1.4.2 ASAP 73
- 6.1.4.3 Background 73
- 6.2 Creating a RAID 74
- 6.3 View RAID Set 80
- 6.4 Modify/Delete RAID Set 83
- 6.4.2 Deleting the RAID 85
- 6.4.3 Renaming the RAID 86
- 6.5 Expanding a RAID 87
- 6.6 Rebuilding a RAID 89
- 6.7 Verifying a RAID 90
- 6.8 Sparing Strategy 91
- 6.8.2 Deleting a Hot Spare 93
- 6.8.3 Viewing Hot Spares 94
- 6.9 RAID Ownership 95
- View Logical Volumes 101
- 7.4 Host Mapping 109
- Chapter 8 Monitoring 112
- 8.2 Disks 115
- 8.2.1.1 Disk Status 116
- 8.2.2 Disk Errors 117
- 8.3 Port Statistics 118
- 8.4 Event Log 120
- Chapter 9 Administration 122
- 9.2 Fibre Channel Config 123
- 9.3 Ethernet Configuration 125
- 9.5 SNMP Configuration 129
- 9.6 Change Password 131
- 9.7 Update Firmware 132
- 9.8 Reset Controller 133
- 9.9 Telnet 134
- 9.11 Config Save/Restore 136
- 9.12 Export Status 137
- 9.13 Set Date and Time 138
- 9.14 Setup Wizard 139
- Chapter 10 Troubleshooting 140
- 10.2 Alert Messages 144
- 10.2.2 Warnings 146
- Appendix 149
- For SES2 board PRO-90-5601: 151
- For PRO-90-6601 SES board: 154
Související produkty a manuály pro Řadiče RAID MicroNet Fibre to SAS/SATA II RAID Subsystem
(138 stránky)Panasonic PVGS65 manuels
Manuels d'utilisation et guides de l'utilisateur pour Lecteurs de DVD Panasonic PVGS65.
Nous fournissons des manuels en pdf Panasonic PVGS65 à télécharger gratuitement par type de document :
Komentáře k této Příručce