MicroNet SP5004 Uživatelský manuál stáhnout pdf (Strana 64)

-sntp

Simple Network Time Protocol (0=No update, 1=Specify server

IP). When SNTP function is activated, users have to specify a

SNTP server as network time source

Example : ifaddr -sntp 1 168.95.195.12

-dns

Specify the DNS server’s IP address

-timezone

Set local time zone according to GMT

-ipsharing

Enable this function when the VoIP gateway behind the NAT

router or IP Sharing devices.

Example : ifaddr -ipsharing 1 61.219.198.204

Note : If you don’t have static public IP address, then the dedicated IP address is not

necessary in the command, for example : ifaddr -ipsharing 1 However, dynamic IP

Address is not working in Peer-to-Peer mode.

Information Example:

usr/config$ ifaddr -print

Internet address information

WAN IP address : 192.168.1.8

Subnet mask : 255.255.255.0

Default gateway : 192.168.1.1

DHCP startup : OFF

SNTP : mode=1

server 168.95.195.12

time zone : GMT+8

cycle=1024 mins

IPSharing : no IPSharing device.

Primary DNS Server : 168.95.192.1

Secondary DNS Server : 168.95.1.1

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 85 86

Žádné komentáře

MicroNet SP5004 Uživatelský manuál Strana 64